Guidelines for wearing labor protection equipment: Work clothes must be worn during operation, long hair should be tucked into a work cap, and cuffs and clothing corners should be fastened; wear protective goggles or face shields, protective shoes, and if necessary, safety helmets, earplugs or earmuffs; it is strictly prohibited to wear gloves or open clothes during operation.
Preparation of safety requirements before homework: Check the protection, safety, signal devices, mechanical transmission parts, and electrical facilities of the lathe; confirm that the workpiece, chuck, fixture, and cutting tool are intact and securely installed; adjust the handle position correctly; preheat the lathe at low speed, check the lubrication system and transmission components; ensure sufficient coolant; when adjusting or wiping the rotating parts, the machine must be stopped.
Safety operation requirements during the homework process: Always pay attention to the operation situation and do not leave the post at will; if you need to leave, you must park and cut off the power; strictly follow the process requirements, control the cutting amount and cutting speed; do not use hands instead of tools to clean chips; prohibit delivering items beyond the rotating parts of the lathe; do not use hammering to fasten fixtures; tools, measuring tools, and other items should be placed on the tool rack.
