The safety operation methods of safety equipment mainly include the following aspects:
Instructions for using the safety hammer:
Pick up the safety hammer and strike the side glass tapping point or four corner areas, do not strike the middle part.
Some glass has a film that won't immediately come off when it breaks, and can be kicked open with a foot.
After the glass falls off, it should be promptly ejected from the vehicle and transferred to a safe place.
Instructions for using fire extinguishers:
Lift the fire extinguisher: Shake it upside down to loosen the dry powder, and the handheld dry powder fire extinguisher must be used upright.
Remove the safety pin: After removing the safety pin, the nozzle should not be directed towards people to prevent injury.
Aim at the root of the flame: The operator must operate in the upwind direction.
Press valve spray: Aim at the flame spray, pay attention to controlling the effective distance and usage time of the fire extinguishing point.
Instructions for using fire hydrants:
Open the fire hydrant door, press the internal fire alarm button, and deploy the fire hose.
Connect the hose to the fire hydrant interface and the other end to the fire water gun.
Open the water valve and aim at the root of the fire source to extinguish the fire. Be careful not to twist or bend the water hose, and pay attention to whether the power supply on site is disconnected when extinguishing the fire.
The technical architecture and functions of the fortress machine:
Technical architecture: The bastion host adopts a layered architecture design, including access layer, control layer, audit layer, storage layer, and integration layer. Supports multiple protocols, implements attribute based access control, and uses a distributed stream processing engine for real-time analysis.
Function: Supports multi factor authentication, fine access control, identity authentication system, etc., ensuring the security and compliance of operation and maintenance operations.
The usage scenarios and functions of nuclear radiation detectors:
The dt-9501 nuclear radiation detector can detect four types of radiation: Alpha, beta, gamma, and x-rays, measure the number of radiation pulses, and achieve advanced detection sensitivity in the industry.
The application scenarios include nuclear power plants, pharmaceutical factories, laboratories, power plants, etc., which can provide accurate data references and are suitable for high sensitivity and high detection range scenarios.
